Intelligent Heating Controls

Energy Savings of up to 30% (25% Average))
Dataterm provides a new way of controlling the heating in and small and large commercial properties alike. It’s “fuzzy logic”
replaces the standard on/off programming of conventional programmers to give you the control you normally only get with complex
expensive systems installed in larger commercial buildings. It is truly self-learning and easy to use and install and has won
a millennium product award for it’s potential to save energy and help the environment.
- Optimum Start

Optimisation as its also known is how Dataterm can literally save you £s… Most operations set the time for their heating to come on at least an hour before they need it.

Dataterm being clever works out the best time to turn on the heating thus removing the need for a fixed heat up time, this is very valuable as some days the heat up time might be 15 minutes and others 25 minutes and so on.

Straight away you have reduced the amount of fuel you have used and achieved the required temperature at the set time.

So with Dataterm there’s no more setting the clock to come on early whether it needs to or not, and that’s not all, Dataterm does the same thing when turning off and you wont even notice.

Controlling the heat efficiently
Ordinary room thermostats (if you have one) don’t always maintain an even temperature; this is basically because of the nature of the design and often cause large variations in temperature. For instance the thermostat may allow the temperature to rise above the required temperature by some 1-3 degrees before turning off the heating and the same below when turning back on. Not only is this a waste of heat and fuel but it makes you feel uncomfortable as well, Dataterm accurately controls the heating to within 0.3°C by increments of 0.1°C saving you from hot and cold
shifts in temperature and reducing your fuel usage

If you require any information on this section please contact UK ECO here